REIKU Middle Jaws / REIKU Middle Jaws
REIKU代理商：上海颐品自动化科技有限公司
REIKU法兰盘，REIKU分线头，REIKU中间内夹，REIKU直通接头和内夹 REIKU代理商：上海颐品自动化科技有限公司
关键词：REIKU尼龙软管，REIKU机器人尼龙软管，德国REIKU-PA12尼龙软管
REIKU尼龙软管接头，REIKU尼龙软管固定座，REIKU防撞块，REIKU星型分线头
REIKU尼龙软管，REIKU编织网管，REIKU机器人软管，REIKU管夹支架，
REIKU防撞块，REIKU尼龙软管接头，REIKU尼龙固定座，REIKU尼龙软管
Descript ion：
Middle Jaws have two ridges that lock into the corrugations of the conduit and prevent the conduit from moving laterally through the Gripping Clamp assembly. The Middle Jaw is only used in assemblies where the conduit will pass through the Gripping Clamp on either side. The Middle Jaw is narrow and does not protrude past the outside of the Gripping Clamp and this allows the conduit to make sharp bends/transitions immediately after passing through the Clamp Assembly.
* All of the REIKU Jaw sets (except Comb Jaws) rotate in an orbital/radial direction inside the Gripping Clamp in order to prevent/ remove torsion load.
Part Numbers：
| Part No. | REIKU中间内夹 | Quantity |
|---|---|---|
| PAMBB-23 F/G | Middle Jaw | 25 |
| PAMBB-29 F/G | Middle/Combi-Jaw | 25 |
| PAMBB-42 | Middle Jaw | 10 |
| PAMBB-48 F/G | Middle Jaw | 10 |
| PAMBB-52 | Middle Jaw | 10 |
| PAMBB-70 | Middle Jaw | 10 |
